Miller Plasma Cutter With Built in Compressor

Every welder wishes welding could be as easy as people think it is. From cutting, casting, bending, hitting, to finishing like filing, a welder is easily known for his tough and rough skin resulting from all of these excessive stress.

A popular international welder once said that cutting is never easy, cutting according to him is engineering most strenuous practice, nevertheless with miller plasma cutter with built-in compressor, sweating and puffing on your cutting table is over.

Even though a lot of plasma cutters have found their way into the market and new ones are flowing in day in day out, some welders are still missing out on every benefit these seamless cutters come with.

Now the question “what is a plasma cutter” arise.  A plasma cutter is any machine designed to make it easier for welders to get every plate of metals into their desired shapes and sizes. Using hot fluid like gas, these machines are capable of cutting through ½-inch thick aluminum, copper, and steel without stress.

Why then keep going through all the stress when there is lots of powerful plasma cutter for sale to make give a hundred percent perfection to your cut? Plasma cutters out there include; Hobart plasma cutter, Lincoln, and lotus to mention a few.

To draw every benefit of these machines to you, see below things to look out for when buying a plasma cutter.

Must have Miller Plasma Cutter Tip Guide

Now that you know how essential cutters are, after reading so many positive reviews and testimonies from friends, it is time to have your own purchase, but what are those things to be considered when buying one? See here:

  • Nature of material: before investing on any plasma cutter, ask yourself; what material will I be cutting with it most? Not every cutter can work on copper; some are specifically built for fine steel, while others are for alloy.


  • Thickness of material: do you cut ½-inch thick materials than you do ¾-inch thick? The effect of choosing the wrong cutter goes beyond the machine failure, some materials may be too thick to cut ½-inch material, and this can slow down cut as much as it can reduce cutting efficiency.


  • Power usage: if a seller won’t allow you to check a machine’s power usage, never buy it. You may be buying something unusable, as the inadequate power supply can render some plasma cutter useless.


  • Purpose: will you be traveling with it? Is it just for your home? It is advisable to go for a portable one if you are an international welder who will be taking it from place to place for easy mobilization. Whereas if you want something just for your home to do those little cutting, a big one may be the right choice. Large construction industries dealing with engineering should also go for massive miller plasma cutter.


  • Cutting efficiency: in whatever way you are going to cut, it should be done without the need for a secondary cut, a good plasma cutter should spot a good speed and cut accuracy.


Top 5 Plasma Cutter With Built-in Compressor

With a full insight into how to choose a good plasma cutter, you won’t want to go shopping or placing an order on any cutter. These cutting systems come in types, there are those without an air compressor, being an opposite to plasma cutter with built-in compressor. See this handy list to take along as you browse through different types of plasma cutter in the shop.


Miller Spectrum 375


Miller never disappoints, take that from anybody who has had any of their products used. As an all-time best manufacturing company, miller have continue to push the industry forward with its latest products, one of which is the double combo miller spectrum 375 that cuts ½-inch steel like a knife does to bread and butter.

Weighing exactly 33.6 pounds, the 13.2×5.5×9 sized monster from the X-TREME series demands 208/240V to use its 3/8” at 18 IPM for a perfect cut without roughs or a need for secondary cutting.

With a rated output of 30A, this powerful system spotting heavy-duty work clamps, MVP plugs, firm shoulder straps, XT30 torch, and extra consumables will keep your eyes off any other cutter.

Those who buy it lay much emphasis on its cutting capacity and speed in their reviews.



Miller spectrum 875 plasma cutter

Cutting gets really exciting when you can cut 10inch every single minute, but what if cutting 15inch/minute accurately is possible?

The miller spectrum 875 plasma cutter, is another portable cutter with ultra quick connect that ease the connection between the cable and torch. From 7/8 mild steel to solid iron, its cutting capacity will turn your cutting nightmares to happiness.

When plasma cutters first hit the market, there’s was this frustration arising from having to get them to work only by spending extra bucks on compressors. Miller spectrum 875 works great without the need of a bulky compressor which waste time to operate, owing to its automatic inbuilt compressor that doesn’t in any way add weight to it.



Miller Spectrum 625 X-TREME

What else do you need to cut 5/8inch perfectly? This circuitry is the best thing that have ever happened to the welding industry.

Connecting automatically to 120-240 VAC, the state-of-the-art flexibility uses 60 Hz single interphase without any other requirement except that you need to get the right plug for the receptacles in order to get into power.

Good news is you don’t have to waste your money on extra tool kits, as this state-of-the-art flexibility spots an extra kits containing gloves, eye protector etc.



Miller Spectrum Auto-line

This torch was designed to make cutting a breeze for you. With the inbuilt compressor, this automatically operated spectrum will go through every thickness ranging from ½-inch to the most dense steel. With an input of 200v to 575volt, you will be making a day job done within a few minutes.


Miller spectrum Long Body XT40

This is the ultimate choice of international welders who need to travel with a miller spectrum. The X-CASE provides protection when transporting it and it comes with drag shield, automatic air regulation. The automatic air regulator seamlessly prevent pressure to stop mistake while cutting.

Leave a Comment